Skip to content
Comep Steel Windows logo

Europe ยท Window Manufacturer

Comep Steel Windows: Window Cleaning Guide

๐Ÿ‡ฎ๐Ÿ‡น Italy ยท Last updated 20 November 2026

For owners, installers and cleaners looking after Comep Steel Windows. Care guidance first, then the Orloffs Protocol I use as a window cleaner since 1999.

See the 6 steps

A squeegee pulling soap water off a window, with a harbor behind the glass

Brand at a Glance

HQ
Quarrata, Tuscany, Italy
Materials
Steel
Market
Bespoke, worldwide via retailers

Product Range

  • Steel Windows
  • Steel Doors
  • Conservation Systems

Why This System

Steel profiles are slim and structural - any moisture trapped at frame junctions risks surface corrosion if protective coatings are damaged. Bespoke manufacture means each installation has individual junction details - assess each window before choosing a cleaning method. Glass is typically bedded in steel frames with putty or specialist sealant - avoid getting water behind the glazing bead.

Step 1 of 2: Care guidance

Care guidance

No official guide is linked here. The steps below are based on Justin Orloff's hands-on experience since 1999 with this system.

Step 2 of 2: The Orloffs Protocol

The Orloffs Protocol

This is how I clean Comep Steel Windows. The tools and technique below come from daily professional work on the glass since 1999. Every step has been tested on real installations and adapted specifically for Comep Steel Windows systems.

Follow these steps in order. Each one builds on the last. This is the same sequence I use on every Comep Steel Windows installation.

The six steps are the same on every window. Below are the notes that matter for this maker. Read the full Orloffs Protocol.

Pro Tools

My daily tool list. This is what I carry to every job.

  1. 1Microfiber T-bar applicator, kept clean and rinsed regularly to prevent grit
  2. 2Professional squeegee with a fresh rubber blade
  3. 3Extension pole for glass above arm height
  4. 4Bucket with at least 10 liters (about 2.6 gallons) of water and enough soap for cleaning power without excess foam
  5. 5100% cotton toweling rags for edge detailing
  6. 6Vacuum for sill tracks and base profiles
  1. Preparation: before any water touches the glass

    Check the steel frame condition before you start. Confirm which cleaning product is safe for that surface before opening any bottle.

  2. Agitation: apply and work the solution

  3. Detail the frame edge before squeegeeing

    On Comep Steel steel frames, pay particular attention to the bottom edge where glass meets the frame sill: water pooled here runs into drainage openings and leaves residue over time.

  4. The squeegee

  5. Final edge detailing

    On Comep Steel frames, the bottom edge where glass meets the sill requires the most careful attention. Water left here runs into drainage and leaves residue that affects the next clean.

  6. Frame wipe and hardware check

    On Crittall steel frames: dry immediately after any water contact. Steel corrodes if moisture is left on the surface: edge drying is not optional.

What NOT To Do

  • Never leave moisture on steel frame profiles - wipe dry at every clean.
  • No acid-based cleaners on steel - these attack the protective coating and accelerate corrosion.
  • No abrasive pads on painted or galvanized steel frames.
  • Do not drive water behind glazing beads or into frame junctions.

Bundle Kit

Pro Kit

The full professional setup. Brass squeegees, T-bar with applicator cover, tool belt, rags, soap, and bucket. Everything from the daily tool list in one box.

Cleaning Frequency

I recommend cleaning twice a year, depending on your local environment. City locations may need more frequent cleaning.

Frequently Asked Questions

How often should I clean Comep Steel Windows?

For Comep Steel Windows: I recommend cleaning twice a year, depending on your local environment. City locations may need more frequent cleaning.

What tools do I need for Comep Steel Windows?

Professional cleaning of Comep Steel Windows requires my daily tool list of: Microfiber T-bar applicator, kept clean and rinsed regularly to prevent grit, Professional squeegee with a fresh rubber blade, Extension pole for glass above arm height, Bucket with at least 10 liters (about 2.6 gallons) of water and enough soap for cleaning power without excess foam, 100% cotton toweling rags for edge detailing, Vacuum for sill tracks and base profiles.

What should I avoid on Comep Steel Windows?

Never leave moisture on steel frame profiles - wipe dry at every clean.

Does Comep Steel Windows publish an official cleaning guide?

I have not found an official Comep Steel Windows cleaning guide to link here. The protocol on this page is based on my hands-on experience since 1999.

Can I use a water-fed pole on Comep Steel Windows?

In my experience, yes: purified water via a water-fed pole is one of the safest methods for Comep Steel Windows glass. Ensure TDS is at or near zero before use and avoid directing high-pressure water at seals or gaskets.

Field Notes

โ€œSteel windows on heritage or conservation projects often have original putty glazing. Inspect the putty condition before cleaning - cracked or missing putty allows water ingress. Report findings to the client before proceeding.โ€

Justin Orloff

Do you make windows, doors or glazing?

The brands here are not partners. We wrote these care guides ourselves, so your customers know how to look after your windows. Want your own?

Become a Brand Partner

Brand logos provided by Logo.dev